Prodigy HD Capture Card: Recording Evercade Gameplay Explained
By Stone Age Gamer | Published: 2026-11-01
Category: How-to Guides
Learn how to set up the Prodigy HD Video Capture Card to record Evercade gameplay on PC. Step-by-step guide with practical tips and common pitfalls.
Quick answer
To record Evercade gameplay with the Prodigy HD Video Capture Card, connect the Evercade's HDMI output to the Prodigy's HDMI input, plug the Prodigy into your PC via USB, and use OBS to capture the signal. This guide walks you through each step and highlights common mistakes to avoid.
Why the Prodigy suits Evercade capture
The Prodigy HD Video Capture Card is designed for high-quality 1080P recording and streaming without overloading your CPU. Its broad compatibility with popular software like OBS makes it a practical choice for capturing Evercade gameplay, whether you're archiving your sessions or sharing them online.
Because the Prodigy handles the video encoding, your computer can focus on running the capture software smoothly. This is especially useful if you're using a modest PC or laptop for recording retro handheld gameplay.
What you need before you start
Gather your Evercade console, the Prodigy capture card, an HDMI cable, a USB cable, and a PC with OBS installed. Make sure your Evercade is charged or powered, and that your PC meets the basic requirements for OBS. If you plan to stream, have your platform account ready.
Step-by-step setup for recording Evercade gameplay
- Connect the Evercade to the Prodigy: Plug one end of an HDMI cable into the Evercade's HDMI output and the other end into the Prodigy's HDMI input. Check that the cable is securely seated; a loose connection is a common cause of no signal. Ensure the Evercade is powered on before proceeding.
- Connect the Prodigy to your PC: Use the supplied USB cable to connect the Prodigy to a USB port on your computer. Avoid using a USB hub if possible, as direct connection provides a more stable signal. If your PC doesn't recognize the device, try a different USB port.
- Install and open OBS Studio: Download and install OBS Studio if you haven't already. Launch OBS and go to Sources, then add a Video Capture Device. Select the Prodigy from the device list. If the Prodigy doesn't appear, restart OBS or replug the USB cable.
- Configure the video settings: In the Prodigy's properties within OBS, set the resolution to 1920x1080 and the frame rate to 60fps (or 30fps if your PC struggles). Choose the correct video format (e.g., MJPEG or YUY2) based on what the Prodigy supports. Test different formats if the image looks laggy or discolored.
- Adjust audio input: If you want to record game audio, add an Audio Input Capture source in OBS and select the Prodigy's audio input. If the Evercade outputs audio via HDMI, this should work automatically. Check that the audio isn't muted in OBS's mixer.
- Test and record: Click Start Recording in OBS and play a game on the Evercade. After a minute, stop recording and review the file to ensure video and audio are captured correctly. Always do a short test recording before a long session.
Product facts
- Prodigy HD Video Capture Card - BeharBros: The PRODIGY is a video capture device that supports 1080P resolution and works with OBS, YouTube, Twitch, and Facebook without CPU overload. This means you can capture Evercade gameplay in full HD and stream directly to popular platforms without needing a high-end computer.
Prodigy HD Video Capture Card - BeharBros
