First, confirm the drift is in the stick itself
Before you buy parts, rule out the simpler causes. Connect your DualShock 4 to a PC or Mac and open a gamepad tester. If the stick rests off-center or sends ghost input without you touching it, the analog module is the likely culprit. If the controller only drifts in one game, check that game's deadzone settings first.
Once you know the stick is the problem, you have two repair paths: a solder-in drift fix kit that adjusts the existing potentiometers, or a full joystick assembly replacement. They solve different levels of wear and demand different tools.
Repair kit vs. full joystick replacement: what each one does
- Controller Analog Stick Drift Fix 1.2: A flex PCB that solders to the back of the analog stick solder points. It lets you re-center the stick by turning two potentiometer screws, so it targets drift caused by a shifted center point. It works only if the original potentiometers are not damaged. One set includes two PCBs, enough for the left and right sticks in one controller.
- TMR Joystick Assembly for PS4: A complete replacement joystick module. You desolder the original stick and solder the new one in place. This is the path when the module itself is worn or faulty, not just off-center. The listing includes one joystick and requires soldering.
Drift fix kit: compatibility and limits
- Controller Analog Stick Drift Fix 1.2: Compatible with PS4, PS5, Xbox One, Xbox Series S & X, First Gen Xbox Elite, and Switch Pro Controllers (some additional housing alteration required for Switch Pro). If you own multiple controllers, one kit type covers several platforms, but the Switch Pro needs extra fitting work.

Controller Analog Stick Drift Fix 1.2 - Controller Analog Stick Drift Fix 1.2: Fixes the center point of the analog to stop ghost input (drift). Can be readjusted in the future by adjusting the pot screws. This is a tuning repair, not a replacement. It suits sticks that are off-center but still physically sound.
- Controller Analog Stick Drift Fix 1.2: Requires internal fitting and soldering. Installation voids any warranty from the controller manufacturer. Plan for opening the controller and soldering. If your controller is still under warranty, this repair ends it.
- Controller Analog Stick Drift Fix 1.2: SCUF Instinct Pro requires isolating the PCB top from the back shell with electrical tape over the adjustable potentiometers. If you use a SCUF Instinct Pro, add this insulation step or the fix may not work correctly.
TMR joystick assembly: what you get
- TMR Joystick Assembly for Sony PS4 Controllers: TMR Joystick Assembly (K Silver Model) made for PlayStation 4 controllers. Includes 1x joystick. Soldering required. This is a direct replacement for one stick. If both sticks drift, you need two assemblies.

TMR Joystick Assembly for Sony PS4 Controllers - TMR Joystick Assembly for Sony PS4 Controllers: Direct replacement: de-solder your original joystick and solder the new one into place. The procedure is straightforward for anyone comfortable with desoldering, but it is not a drop-in part.
How to choose the right repair for your drift
Use your gamepad tester readings and a quick visual check of the stick to decide.
- Step 1: Check if the stick returns to center: If the stick physically springs back but the tester shows an offset, the center point has shifted. The drift fix kit is designed for this case, provided the potentiometers are not damaged.
- Step 2: Look for physical wear or damage: If the stick feels loose, gritty, or does not move smoothly, the module itself may be worn. A full TMR joystick replacement is the more direct fix.
- Step 3: Match the repair to your soldering comfort: Both products require soldering. The drift fix kit solders a flex PCB to the existing stick's solder points and then tunes two screws. The TMR assembly requires desoldering the old stick and soldering in a new one. If you are new to soldering, practice on a scrap board first.
- Step 4: Consider future adjustability: The drift fix kit can be re-adjusted later by turning the potentiometer screws. A replacement joystick is a new module, so future drift would need a new repair.
What the supplied information does not confirm
The TMR joystick listing does not include a step-by-step calibration procedure or a list of required tools beyond soldering. The drift fix kit listing points to a YouTube video for installation and setup, but the written steps cover only the basic sequence: solder the flex PCB, connect to a PC or Mac, open gamepad-tester.com, and adjust the two potentiometer screws with a Philips screwdriver. Neither listing confirms whether the parts fit every DualShock 4 revision, so check your controller model before ordering.



