Back to Blog
How-to Guides 2026-11-17 Stone Age Gamer 0 views

Hook Up a TurboGrafx-16 or PC Engine to a Modern TV

Hook Up a TurboGrafx-16 or PC Engine to a Modern TV

Use the Engine Block AV to add RGB, S-Video, and composite outputs to your TurboGrafx-16 or PC Engine, then connect to a modern display or upscaler with the right cables.

Start with the right output adapter

The TurboGrafx-16 and PC Engine don't have built-in AV outputs like later consoles. To connect one to a modern TV, you need an adapter that taps the rear expansion port. The Engine Block AV for TurboGrafx-16 and PC Engine is one option: it adds three output connectors—a Mini DIN9 (Sega Genesis 2 style), an S-Video connector, and RCA jacks—so you can use standard cables you may already own.

Before you buy or plug anything in, check that your console has the rear connector for the Booster or CD add-on. The Engine Block AV will not work with a CD add-on or Booster attached, so you'll need to remove those first. Also note that the adapter does not include any AV, S-Video, or DIN9 cables—you'll need to supply your own.

What the Engine Block AV gives you

  • Engine Block AV for TurboGrafx-16 and PC Engine: Three output connectors: Mini DIN9 (Sega Genesis 2 A/V), S-Video (Mini DIN4), and RCA jacks (yellow/white/red). You can choose the connection type that matches your TV or upscaler—composite for simplicity, S-Video for a step up, or RGB via the Mini DIN9 for the best quality.
    Engine Block AV for TurboGrafx-16 and PC Engine
    Engine Block AV for TurboGrafx-16 and PC Engine
  • Engine Block AV for TurboGrafx-16 and PC Engine: Compatible with standard Sega Genesis 2 cables including 75 ohms resistors and 220uF coupling capacitors. If you already own Genesis 2 AV cables, they will work with the Mini DIN9 output, saving you from buying new ones.
  • Engine Block AV for TurboGrafx-16 and PC Engine: The RCA jacks carry stereo audio and direct composite video from the console, same as the original Turbo Booster. This is the simplest way to get video and audio to a TV with standard RCA inputs.

Step-by-step: connect your console to a modern TV

Follow these steps in order. Take your time with the first step—the expansion port pins are delicate.

  1. Inspect the expansion port pins: Before inserting the Engine Block AV, make sure all pins on the console's expansion port are straight and aligned. If any are bent, stop and address that first.
  2. Insert the adapter slowly: Align the adapter and insert it very slowly. If you feel any resistance, stop immediately and check for bent pins. Forcing it can bend or break the pins—the adapter cannot bend them unless they were already misaligned.
  3. Choose your video output: For a modern TV with no legacy inputs, you'll likely need an upscaler. The Mini DIN9 output carries RGB + CSYNC (SCART) and is recommended for the best quality—use a cable with CSYNC. The S-Video output carries Y/C video. The RCA jacks carry composite video.
  4. Connect audio: The RCA jacks provide stereo audio. If your TV or upscaler has separate left and right audio inputs, use the white and red plugs. If you only get sound from one speaker, see the audio section below.
  5. Power on and check: Turn on the console and TV, select the correct input, and verify both video and audio. If using an upscaler, check that it supports the output you chose.

Cable compatibility and what to avoid

The Engine Block AV works with standard Sega Genesis 2 A/V cables, including the common yellow/white/red composite cable. It also works with standard S-Video cables. For RGB, use a cable with CSYNC—Stone Age Gamer can recommend a source if you need one.

One important warning: HD Retrovision cables are not compatible with this device. Also, there is no way for the Engine Block AV to bend or break expansion port pins unless they were already damaged. Inserting the adapter is at your own risk, and neither Stone Age Gamer nor the manufacturer is responsible for damage to your console.

Audio: stereo output and the one-speaker issue

  • Engine Block AV for TurboGrafx-16 and PC Engine: Stereo audio only; mono audio is not supported by the dbGrafx Booster inside this adapter. If your setup only has mono audio, you'll need a way to duplicate the signal to both speakers—see the Y-splitter below.
  • Mono to Dual RCA Stereo Y-Splitter Adapter Cable (Single RCA Female to 2x RCA Male): Mono to Dual RCA Stereo Y-Splitter Adapter Cable takes a single mono RCA output and duplicates it across left and right RCA channels. If you're using a console that outputs mono (like a Sega Genesis Model 1 or Atari 8-bit) with this adapter, this cable ensures sound comes out of both speakers.
    Mono to Dual RCA Stereo Y-Splitter Adapter Cable (Single RCA Female to 2x RCA Male)
    Mono to Dual RCA Stereo Y-Splitter Adapter Cable (Single RCA Female to 2x RCA Male)

Using a Y-splitter for mono consoles

The Engine Block AV outputs stereo audio, but many classic consoles—including the Sega Genesis Model 1, Sega Master System, Atari 8-bit, Commodore 64, and TI-99/4A—only output mono. If you connect such a console to a stereo TV or upscaler, you may only hear sound from one speaker. The Mono to Dual RCA Stereo Y-Splitter Adapter Cable solves this: plug the console's mono RCA output into the female jack, then connect the two male RCA ends to your TV, soundbar, AV receiver, or upscaler. It requires no external power and has short, flexible wiring to reduce strain on your ports.

This splitter is not needed for the Engine Block AV itself, since it already provides stereo audio. But it's a handy accessory if you also use other mono consoles in the same setup.

What about the Framemeister and RGB?

If you plan to use the Engine Block AV with a Framemeister upscaler via RGB, be aware that some users find audio noise distracting. This is an issue with the Framemeister itself, not with the adapter. Stone Age Gamer charges a 15% restocking fee and does not refund shipping costs for returns related to this issue, so consider that before ordering if you use a Framemeister.

Related Articles

Customer Service
Home
Products
Cart
Profile