BladeGC Wireless Controller Setup and Pairing Guide

Quick answer

To set up the BladeGC, power on the controller, then sync it to your GameCube using the receiver or to your Switch or PC via Bluetooth. Most pairing issues are fixed by charging the controller fully, keeping it within a few feet of the receiver during sync, and resetting the connection if it drops.

What you need before you start

Before pairing, confirm you have the right equipment for your platform. For GameCube, you need the BladeGC controller and its included wireless receiver. For Switch or PC, you need the controller charged and your system's Bluetooth or USB receiver ready. A fully charged controller prevents sync failures caused by low battery.

How to pair the BladeGC with GameCube

Plug the wireless receiver into a GameCube controller port. Turn on the GameCube and press the sync button on the receiver, then press the sync button on the controller. The controller's LED will blink and then stay solid when paired. If it doesn't connect, unplug the receiver, wait a few seconds, and try again.

How to pair the BladeGC with Switch or PC

On Switch, go to System Settings > Controllers and Sensors > Change Grip/Order, then hold the sync button on the BladeGC until the player LED lights up. For PC, put the controller in pairing mode and add it as a Bluetooth device in your operating system's settings. The BladeGC supports X-input on Windows, so it works with most modern games without extra software.

Using the BladeGC with a GameCube controller adapter

If you prefer to use the BladeGC with a GameCube controller adapter (like the 8BitDo GBros. Wireless Adapter), you can connect the adapter to your Switch or PC. The GBros. adapter lets you use original wired controllers, but the BladeGC is already wireless, so you can pair it directly without an adapter. However, if you want to use the BladeGC on a GameCube with a wired connection, you would need a different setup. The BladeGC is designed for wireless use, so an adapter is not required.

Troubleshooting common BladeGC pairing issues

If the controller won't pair, first make sure it's charged. Try resetting the controller by holding the sync button for 10 seconds. On GameCube, check that the receiver is firmly in the port and that the console is on. For Switch, ensure airplane mode is off and the controller is not already paired to another device. If you still have trouble, test the controller on another platform to isolate the problem.

Step-by-step setup for BladeGC

1. Charge the controller: Connect the BladeGC to a USB power source using the included cable and charge it fully. A partial charge can cause pairing failures. Checkpoint: The LED should indicate charging and turn off when full.
2. Power on your system: Turn on your GameCube, Switch, or PC. For GameCube, make sure the receiver is plugged into a controller port. Checkpoint: The system should be on and ready for a controller connection.
3. Put the controller in pairing mode: Press and hold the sync button on the BladeGC until the LED starts blinking rapidly. This indicates it's ready to pair. Checkpoint: If the LED doesn't blink, the controller may need charging or a reset.
4. Sync with your platform: For GameCube, press the sync button on the receiver. For Switch, go to Change Grip/Order and wait for the controller to appear. For PC, add it via Bluetooth settings. Checkpoint: The LED on the controller should become solid when paired.
5. Test and troubleshoot: Once paired, test the buttons and analog sticks in a game. If inputs lag or drop, move closer to the receiver or console, and avoid obstacles between the controller and receiver. Checkpoint: If issues persist, reset the controller and repeat the pairing process.

Product facts

• BladeGC Wireless Controller for GameCube - Retro Fighters: The BladeGC is compatible with GameCube, Switch, and PC, and features pressure-sensitive analog triggers. This means you can use one controller across multiple systems, and the analog triggers provide precise control in racing and shooting games.
• Gbros Wireless Adapter for Nintendo Switch - 8BitDo: The GBros. Wireless Adapter connects original wired GameCube controllers to Switch and has built-in home and screenshot buttons. If you already own wired GameCube controllers, this adapter lets you use them wirelessly on Switch, saving you from buying new controllers.