Three adapters, three different jobs
Retro Frog sells three fan adapters for the original Xbox, but they don't compete for the same slot. The 40mm GPU fan adapter replaces the small fan on version 1.0 consoles. The 60mm Noctua and 70mm Nexus adapters both mount a replacement rear case fan, and the choice between them comes down to which fan you can source and whether you want a two-piece mount or a single bracket.
All three are adapter plates only. You supply the fan, and each listing has its own fit and installation notes that matter more than the price difference.
Which adapter fits which fan and Xbox version
- 40mm GPU fan adapter (Ver 1.0): Fits only the 1.0 version of the original Xbox. It lets you use a 40mm x 10mm thick, 12V fan in place of the loud proprietary GPU fan. Later models with the larger GPU heatsink and no fan can't use it, and don't need it.
- 60mm Noctua adapter: A two-piece mount for a 60mm Noctua fan in the rear case position. The listing notes the Noctua is slightly quieter than the Nexus and is easier to source worldwide.
- 70mm Nexus adapter: A single adapter plate with four fan screws for a 70mm Nexus fan in the rear case position. You'll need to remove the two rear mounting ears on the Nexus fan to clear the hard drive tray/duct.
The rear fan decision: 60mm Noctua vs. 70mm Nexus
Both rear adapters solve the same problem: the stock fan is a proprietary 72-ish mm shape with tabs that secure it to the back of the case, and there's no normal way to mount a standard replacement fan. The adapters give a standard fan a secure home.
The 60mm Noctua adapter uses a two-piece mount that locks the fan into place. The listing says the Noctua is slightly quieter than the Nexus and is readily available worldwide, while the Nexus can be difficult to source in some regions. That availability point may matter more than the small noise difference if you can't easily buy a Nexus fan.
The 70mm Nexus adapter is a single plate that mounts to the fan with standard fan screws and slides into the notches on the back of the case. The listing warns that you must remove the Nexus fan's two rear mounting ears to clear the plastic hard drive tray/duct, and that you should be careful when inserting the adapter because the tabs can break if forced.
What each rear adapter includes
- 60mm Noctua Cooling Fan Adapter for Xbox - Retro Frog: Kit includes a 2-piece Noctua fan mount; fan and fan screws are not included. You need to supply both the 60mm Noctua fan and its screws, so budget for those separately.

60mm Noctua Cooling Fan Adapter for Xbox - Retro Frog - 70mm Nexus Fan Adapter and Mount for Xbox - Retro Frog: Kit includes a 70mm Nexus fan adapter plate with 4 fan screws; fan not included. The four screws are included, but you still need to buy the Nexus fan itself.

70mm Nexus Fan Adapter and Mount for Xbox - Retro Frog
The 40mm GPU adapter is a separate fix
If your 1.0 Xbox's GPU fan is the noisy part, the rear fan adapters won't help. The 40mm GPU fan adapter is designed for that small heatsink fan to the left of the large CPU heatsink. It requires a 40mm x 10mm thick, 12V fan, and the listing notes that the fan is not included.
This adapter only works on the 1.0 version. Later Xbox models have a larger GPU heatsink without a fan, so there's nothing to replace and the adapter won't fit.
40mm GPU adapter details
- 40mm GPU Fan Adapter for Xbox (Ver 1.0) - Retro Frog: Designed for the 1.0 version Xbox to mount a 40mm x 10mm thick, 12V fan; fan is not included. Confirms the fan size and voltage you need to buy, and that this adapter is limited to early consoles.
- 40mm GPU Fan Adapter for Xbox (Ver 1.0) - Retro Frog: The original GPU fan is held by 4 screws; the adapter plate reuses those screws and has a cutout for fan clearance. You keep the original screws, but you'll need the new fan's own screws to attach it to the plate.
What installation involves before you buy
- Open the console: All three listings start the same way: flip the Xbox over, remove the 6 Torx T20 screws from the bottom, unplug the hard drive IDE and power, remove two Torx T9 screws between the DVD drive and hard drive tray, and remove another Torx T9 screw to the left of the DVD drive. Then lift the top and unplug the IDE and power cables from the motherboard.
- Remove the original fan: The rear case fan is held by clips at the lower sides. The listing recommends carefully prying them away with a flat screwdriver and lifting the fan out. Be careful not to break the tabs.
- Fit the adapter and new fan: For the 40mm GPU adapter, remove the four screws holding the original fan, unplug its cable, mount the new fan to the plate, place the plate over the heatsink, and secure it with the original screws. For the rear adapters, mount the fan to the adapter first, then slide the assembly into the case notches.
- Reconnect and reassemble: Plug the fan's 3-pin cable into the motherboard header where applicable, then reverse the disassembly steps. The listings don't provide torque specs or a full reassembly checklist, so work slowly and keep track of screws.
What the listings don't tell you
None of the listings state noise levels in decibels, airflow ratings, or bearing type for the recommended fans. The 60mm Noctua listing says only that the Noctua is slightly quieter than the Nexus. If quiet operation is your main goal, that's the only comparative claim supplied.
The listings also don't confirm whether the adapters include thermal paste, replacement screws for the rear fan, or any other hardware beyond what's listed. Check the kit contents above before assuming you have everything.
Finally, the installation instructions are written for the original Xbox generally, but the 40mm GPU adapter is explicitly limited to version 1.0. Confirm your console version before ordering that one.




